在高层住宅楼外保温层上粘贴饰面砖的施工技术

对某住宅小区高层住宅楼外墙外保温面层粘贴面砖,通过设置托架减小了温湿剪切应力,设置热镀锌电焊网加强面层与基层的连接等措施,保证了外墙面层的不脱落。     

采用疏水改性纤维膜处理热镀锌废酸液实验研究

以高孔隙率的纤维膜为气液屏障,研究采用纤维膜的膜蒸馏技术在处理热镀锌废酸液过程中的可行性与效果。结果表明,疏水改性纤维膜对废酸液中含有的Fe^2+的截留率大于99.9%,且废酸液温度越高,渗透通量越大,最大渗透通量约为3.2 kg/(m^2·h)。膜蒸馏过程中,废酸液中的HCl挥发为气体穿过纤维膜,在冷凝侧冷凝为稀盐酸。废酸中的FeCl2会提高HCl蒸气分压力,使HCl的渗透通量增大,总渗透通量减小,从而使蒸馏液中HCl含量增大,有利于回收HCl。将疏水改性纤维膜应用于膜蒸馏过程处理热镀锌废酸液是可行的。     

The Effect of La on the Microstructure and Corrosion-resistance of Hot-dipped Aluminizing Steel

THE HOT-DIPPED ALUMINUM technology of metalsurface is a traditional technology of surfacedisposal[1|21adding some rare-earth during thehot-dipped aluminum process can effect the technologyof hot-dipped aluminum and the microstructure ofhot-dipped aluminizing layer'31,so the surfacecapability of metal is greatly increased,forming a newtechnology of hot-dipped aluminum.After hot-dippedaluminum steel,metal surface has excellent corrosionresistance,high temperature oxidation,especiallycorro…     

唐钢冷轧薄板工程介绍

简要介绍了唐山钢铁集团公司新近建设的 14 0万t连续酸洗线、 60万t冷轧线、 45万t热镀锌线和 15万t彩涂线的工艺流程和生产线主要技术参数     

本钢浦项冷轧薄板机组的工艺特点

介绍了本钢浦项冷轧薄板有限责任公司的概况及主要机组的工艺技术特点。该项目的工艺和装备达到了国际先进水平，具备了生产汽车板和高档家电板的能力。     

La对热浸镀渗铝层抗冲蚀腐蚀磨损性能的影响

研究了稀土La及其加入量对热浸镀渗稀土铝合金渗层显微硬度及抗冲蚀腐蚀磨损性能的影响.结果表明,在相同的工艺条件下, 与渗纯铝相比,加入稀土La元素后,渗层的显微硬度和抗冲蚀腐蚀磨损性能均得到了不同程度的提高.且当La含量为0.5%时, 渗铝层的显微硬度和抗冲蚀腐蚀磨损性能均为最好.     

Effects of turbulence and lubricant inertia on dynamics of journal bearings lubricated with molten zinc in a galvanizing process

In a galvanizing process a continuous sheet of steel is passed through a bath of molten zinc around a series of rotating rollers. One or more of these rollers are submerged in the bath of molten zinc and are supported by journal bearings that are lubricated with molten zinc. Dynamic characteristics of these bearings influence the quality of the finished galvanized sheet and also determine the production speed. This work presents a theoretical study of these bearings in terms of the damping, stiffness, and inertia coefficients of the film of molten zinc separating the journal from the bearings. This work also addresses the influence of turbulence on the bearing dynamics. The damping, stiffness, and inertia coefficients of journal bearings lubricated with molten zinc are determined for different zinc alloys at 450,650, and 850 °F.     

耐锌液侵蚀保护套管材料研究现状

对热镀锌内加热生产方法的特性进行了简述,从材料、制备工艺及性能角度综述了热镀锌内加热器保护套管用金属及合金材料、表面处理材料、无机材料的研究进展,并对碳化硅(SiC)复相陶瓷内加热器保护套管的研究方向提出了一些见解。     

热镀锌表面锌渣缺陷的形成分析及改进研究

结合马钢第四钢轧总厂1#和2#镀锌线投产四年来的生产实践,对热浸镀锌的锌渣缺陷形成机理进行了分析,重点探讨了锌渣缺陷的产生原因,提出在实际生产中从工艺和设备上采取措施进行控制,减少锌渣缺陷的产生,提高镀锌板表面质量。     

生产工艺对低碳铝镇静钢热镀锌钢板性能的影响

以在普通热镀锌线生产低碳铝镇静钢深冲热镀锌板为目标,根据CQ、DQ级热镀锌板生产线的工艺特点,设计了以前罩式退火和后罩式退火生产深冲热镀锌板的工艺方案,分别研究了2种工艺对低碳铝镇静钢热镀锌板性能的影响.结果表明:由于低碳铝镇静钢在前罩式退火时会形成强的{111}织构,可以生产性能良好的深冲热镀锌板;后罩式退火也可以改善低碳铝镇静钢热镀锌板的性能,但其冲压性能主要取决于后罩式退火前的各工序.